Disposable Tests

The following products are currently registered and cleared for clinical use under the CE Mark.  Please contact Sienco if you are unsure of your country's regulatory requirements.  For products currently cleared for clinical use under the U.S. FDA, please visit our Sonoclot USA site.

Sienco offers various tests for different applications, including:


kACT KIT

The kACT Kit is an in vitro diagnostic reagent for use with the Sonoclot® Coagulation & Platelet Function Analyzer System. The kACT test is a kaolin activated whole blood clotting time test. It may also be used with citrated whole blood and plasma.

The kACT Kit is intended for high dose heparin management with or without aprotinin. The kACT test provides quantitative Onset/ACT and Clot Rate results with the Sonoclot Analyzer. The kACT test is not intended for platelet function monitoring.

Available in package sizes of 24 (800-0401) and 100 (800-0400).


gbACT+ KIT

The gbACT+TM Kit is an in vitro diagnostic reagent for use with the Sonoclot® Coagulation & Platelet Function Analyzer System. The gbACT+ test is a glass bead activated whole blood clotting time test. It may also be used with citrated whole blood and plasma.

The gbACT+ Kit is intended for general purpose global hemostasis monitoring including: clot detection, fibrin formation, platelet function, and hyperfibrinolysis. The monitoring information is typically used for anticoagulant management at low to moderate heparin levels (0 to 2 units per ml), hypercoagulable and/or hypocoagulable screening, platelet function assessment, and hyperfibrinolysis screening.

When used with the Sonoclot Analyzer System, the gbACT+ test provides quantitative Onset/ACT and Clot Rate results as well as qualitative and quantitative information on the Sonoclot Signature including: fibrin formation, platelet function, and hyperfibrinolysis.

Available in package sizes of 24 (800-0411) and 100 (800-0412).


H-gbACT+ KIT

The H-gbACT+ test is a glass bead activated whole blood clotting time test with added heparinase capable of neutralizing up to 5 units/ml of heparin.  This test is ideal for post-protamine hemostasis monitoring and in cases where small amounts of residual heparin may prolong a normal glass bead test, impeding platelet function monitoring.  

The H-gbACT+ Kit is intended for general purpose global hemostasis monitoring including: clot detection, fibrin formation, platelet function, and hyperfibrinolysis.  Use alongside the gbACT+ test on a SCP2 or SCP4 Sonoclot Analyzer for differential heparinase results.

Available in package sizes of 20 (800-0449) and 50 (800-0448).


NON-ACTIVATED CLOTTING TEST KIT

The Non-Activated Clotting Test Kit contains the necessary components for an in vitro diagnostic test for use with the Sonoclot® Coagulation & Platelet Function Analyzer System. The Non-Activated Clotting Test is the foundation for a whole blood clotting time test. It may also be used with citrated whole blood and plasma.

The Non-Activated kit is intended for customer designed hemostasis monitoring on the Sonoclot Analyzer. The non-Activated cuvette allows for coagulation monitoring using tissue activation, thrombin activation, and other custom activators. Some of the applications for the Non-Activated test with the addition of customer determined reagents are monitoring of fibrin formation, fibrinolysis, hyperfibrinolysis and clot retraction. It is mainly a research tool.

When used with the Sonoclot Analyzer System, the Non-Activated test provides quantitative Onset/ACT and Clot Rate results as well as qualitative and quantitative information on the Sonoclot Signature including: fibrin formation, platelet function, and hyperfibrinolysis.   

Available in package sizes of 24 (800-0426) and 100 (800-0425).


SonACT™ KIT

The SonACTTM Kit is an in vitro diagnostic reagent for use with the Sonoclot® Coagulation & Platelet Function Analyzer System. The SonACT test is a celite activated whole blood clotting time test. It may also be used with citrated whole blood and plasma.

The SonACT Kit is intended for general purpose global hemostasis monitoring including: clot detection, fibrin formation, platelet function, and hyperfibrinolysis. The monitoring information is typically used for anticoagulant management up to high heparin levels (0 to approximately 6 units per ml), hypercoagulable and/or hypocoagulable screening, platelet function assessment, and hyperfibrinolysis screening.

When used with the Sonoclot Analyzer System, the SonACT test provides quantitative Onset/ACT and Clot Rate results as well as qualitative and quantitative information on the Sonoclot Signature including: fibrin formation, platelet function, and hyperfibrinolysis.

Available in package sizes of 24 (800-0431) and 100 (800-0432).


aiACT KIT

The aiACT Kit is an in vitro diagnostic reagent for use with the Sonoclot® Coagulation & Platelet Function Analyzer System. The aiACT test is an activated whole blood clotting time test which uses a proprietary blend of celite and other minerals for contact activation. It may also be used with citrated whole blood.

The aiACT Kit is intended for high dose heparin anticoagulation management as typically encountered during cardiopulmonary bypass surgery. The aiACT test provides ACT results that are substantially unaffected by aprotinin. When used with the Sonoclot Analyzer System, the aiACT test provides quantitative Onset/ACT and Clot Rate Results. The aiACT test is not intended for platelet function assessment. 

Available in package sizes of 24 (800-0441) and 100 (800-0442).

© Sienco, Inc. 2017